Software Recommendations

Please see page 24 in the Agilent
Technologies IrDA Design Guide.
Microsoft (Windows 95) or PUMA
Technology are the most likely
vendors to have released 4Mb/s Ir
software.
Evaluation Boards
HSDL-1100 FRONT lead form
evaluation boards can be obtained
from your Agilent Technologies
Sales Representative. The evaluation
boards can be plugged into a
standard 6-8 pin edge connector, or
hard-wired via cable to your Ir
system’s I/O chip. The connection
to the I/O chip should be as shown
above in the Interface to Recommended
I/O Chips section of this
note. Both VCC pins can be connected
to the same power supply,
or separate supplies as desired.
The ground pin should be connected
to the most noise free
ground on the system board.
HSDL-1100
RXD-A RXD-B
8 7 5
R1
0.1 F
CX2
203 204 190
FDC37C957
IRTX IRMODE IRRX